Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1985 Volvo Wagon Exhaust Manifold Down Pipe Heater Gasket 200 1985

posted by  Habib on  Tue Feb 20 20:35 CST 2024
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 13 23:40 CST 2013
[RELATED]


Hi everyone,

I'm happy to announce that I've successfully resolved the issue at hand. The problem was from the three nuts under the header pipe flange seizing or stopping before the joint could be adequately tightened. To address the issue, I install three M10, 3 mm washers thick beneath the flange. With a torque of 35 ft-lbs applied, the washers effectively brought the two surfaces together and sealed them perfectly. Thank you everyone for your responses.

Habib





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 1985 Volvo Wagon Exhaust Manifold Down Pipe Heater Gasket [200][1985]
posted by  Habib  on Sat Feb 17 17:05 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.