Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1985 Volvo Wagon Exhaust Manifold Down Pipe Heater Gasket 200 1985

No, I was thinking more along the lines of having the downpipe free of any extensions (the rest of the exhaust system) making it easier to manipulate. With the downpipe being loose you could insure that the mating surfaces were making their best contact across both surfaces. It would also allow the downpipe to be moved and held in the correct position while the nuts were tightened.
--
Any twenty minute job is just a broken bolt away from a three day ordeal






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 1985 Volvo Wagon Exhaust Manifold Down Pipe Heater Gasket [200][1985]
posted by  Habib  on Sat Feb 17 17:05 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.