Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any tips on replacing shift lever to clevis bushing on '88 M47 transmission? 200 1988

posted by  tbb2 on  Thu Sep 28 12:19 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 16 18:57 CST 2014
[RELATED]

The bushings are in hand.
The set screw is out.
The pin slides easily through the clevis.
But the pin is stuck at the set screw location inside the base of the shift lever.
I have started PB Blasting thru the set screw.

Any suggestion for a tool that will reach up between the drive shaft and body hump in the floor, clamp on one side of the clevis and press the pin out?
--
1988 244 DL; B230F; LH-2.2; Manual 5-speed (M47)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Any tips on replacing shift lever to clevis bushing on '88 M47 transmission? [200][1988]
posted by  tbb2 subscriber  on Tue Aug 22 11:51 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.