Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any tips on replacing shift lever to clevis bushing on '88 M47 transmission? 200 1988

posted by  tbb2 on  Thu Aug 24 13:27 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 16 18:57 CST 2014
[RELATED]

Phil,

The set screw is not budging. I have applied PB Blaster over several days and lastly taped it with a small hammer.

I would put a torch on it but is surrounded by insulation and asphalt undercoating and the cabin carpet above that. I'm not much in need of a car fire.

FYI:
Clevis (definition from Oxford Language)
a U-shaped or forked metal connector within which another part can be fastened by means of a bolt or pin passing through the ends of the connector.
- It works for your reference too.
--
1988 244 DL; B230F; LH-2.2; Manual 5-speed (M47)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Any tips on replacing shift lever to clevis bushing on '88 M47 transmission? [200][1988]
posted by  tbb2 subscriber  on Tue Aug 22 11:51 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.