Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1992 Volvo Hi/Lo Beam Wiring 200 1992

Hi VolvoJoe,

I have the 92 wiring diagram manual in my lap. I have some of the relevant pages from the 91 manual scanned. When I compare them, for the pages on cruise and the hi/lo selector, they are the same. The switch that pulls in the hi/lo relay on the left fender uses a brown wire. The only thing I see using a blue/red and white/black wire together is part of the cruise control, but not part of the cruise switch wiring. Those wires run to the clutch pedal and brake pedal switches. I hope you're not trying to find where the clutch pedal switch wiring runs on an automatic, for that may have been unconnected when you started your project. In any event, look at the brown wire to fix your hi/lo switch.










--
Art Benstein near Baltimore

My wife says I only have 2 faults. I don't listen and something else...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1992 Volvo Hi/Lo Beam Wiring [200][1992]
posted by  someone claiming to be VolvoJoe  on Tue Aug 3 15:17 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.