Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 intank pump and sending unit 200

uid 55's pic
posted by  john sargent on  Thu Nov 19 13:23 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

After testing the float assembly laying in the trunk, I installed the float fuel pump assembly. Using dental floss I ran a loop around the float arm and up through the smallest tube in the top of the assembly. I was able to manipulate the float throughout it's travel. Then I dropped one end of thge floss, and removed it by pulling on the other end. The calibration isn't what I expected, but using the car will tell me if I can live with it. If necessary I'll remove the assembly and try bending the float arm.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 240 intank pump and sending unit [200]
posted by  john sargent subscriber  on Wed Nov 18 21:28 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.