Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2017 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Persistent leak from the seal between the water pump and the head 700

That's also how I do it on my 240's. A #1 Phillips screwdriver give you control. However, I've found some crusty, pitted metal on the head. Perhaps someone cleaned it up (milled it) past the pitting and that made it a stretch for the seal?






--
Art Benstein near Baltimore

Occam's Razor: That among competing hypotheses, the one with the fewest assumptions should be selected.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Persistent leak from the seal between the water pump and the head [700]
posted by  rstarkie subscriber  on Tue Nov 12 07:54 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.