Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Inspection may require disassembly .... 200 1989

uid 46171's pic
posted by  kittysgreyvolvo on  Thu Oct 24 10:21 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 15:23 CST 2014
[RELATED]

Good news!

Though no need for a bump stop with Bilstein (B4) Touring.

I have Bilstein (B4) Touring all around on my 1992 240 GL sedan.

All works fine save for the damper mounts rattling on the upper studs or maybe the lower trailing arm securing hardware.

Welp, glad it all works for you.

Get to install a used orange DeCarbon on the 1991 sedan as the Bilstein (B6) HD is seized at the left front as I needlessly mentioned earlier.

Bilstein (B6) HD never again. Terrible. Also, not good for lowered suspensions. And I'll NEVER move to lowered suspension again.

Happy Eggnog Holidays!
--
Donate NOW! Give your brickboard.com a big DONATION!!! Find the on brickboard pages!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 89 240 DL Front strut still making clunking noise after shock replaced
posted by  stallison subscriber  on Tue Oct 8 15:15 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.