Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need OEM Volvo Panhard rod (cross stay) 200

posted by  1990Volvo240 on  Thu Sep 15 20:31 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:18 CST 2014
[RELATED]

Hi,

Call machine shops in your area, ask around too if you know anybody who has dealt with any shops around your area. Our local (small town) independent tire shop has a press to do bushings. From what I have read on here most places do not charge a lot to remove and install them. Just make sure the bushings are oriented correctly.

I bought my own press but I had several bushings to do on two different cars at the time. If those are the only ones you need to do then it might not be worth the $. If you do buy one I know myself and others here on the BB would recommend the HF 20 Shop Press.

Travis






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need OEM Volvo Panhard rod (cross stay) [200]
posted by  Engine41  on Thu Sep 15 12:53 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.