Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

re: 87 245 auto - oil separator 200 1987

Hi All,

FYI. I replaced the original (I think) oil separator at 212,000 miles or about 2 years ago. It was partially clogged and it made the new rear cam seal to leak. I kept the old unit and didn't know what to do with it. Today, I decided to cut into 3 pieces and take a look.

The overall, the chamber is clean but the top part of the vent hole area has a heavy build up. I look forward to cut and see my current oil separator for a comparison near future. Thank you as always.

 photo 20151109_210638_zpspggdcilc.jpg

 photo 20151109_210856_zpsp4qdpp2a.jpg

 photo 20151109_211249_zpsf6gnaxam.jpg

 photo 20151109_211816_zpslwwmk8pi.jpg
cleaned the top area/chamber only

 photo 20151109_211828_zpsee8mgdv1.jpg
oil sludge

 photo rearcam3_zps37552919.jpg
The 2 previous owners did a great job replacing oil religiously.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 4 re: 87 245 auto - oil separator [200][1987]
posted by  Swedish Baklava  on Mon Nov 9 20:51 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.