Volvo RWD 444-544 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 7/2017 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel pump valves 444-544 1960

posted by  vinr on  Sat Oct 25 10:39 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 08:36 CST 2014
[RELATED]

Does anyone know how to replace the pressed in valves in the ac fuel pump on the early B16's? I am rebuilding my pump but afraid to just rip the old valves out








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Fuel pump valves 444-544 1960

    posted by  derek uk on  Sun Oct 26 05:40 CST 2014
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 12:33 CST 2014
    [RELATED]

    They're normally held in place by a sort of "spectacle" clip which attaches with 2 screws. There's also a matching gasket. However I have seen them swaged into place with 3 equally spaced punch hits. Not too clever and care will be needed if this is the case. Use 3 new positions for the punch. Photograph or make a drawing of the orientation and position of the valves before you remove them. It's easy to put them back wrong. Annoying if you have the clip, VERY annoying if using a punch.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.