Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2001 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Wheel Stud Part# Needed PV444 444-544

posted by  jk63pv544 on  Tue Jan 8 14:02 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 1 06:04 CST 2014
[RELATED]

Looking for a right hand thread wheel stud to replace on my 57 PV444 front end on my 63 PV544. Anyone know of a current standard stud (available at most auto parts stores) that will fit, even if it needs to be shortened? If you do, could you please provide the part number or some kind of reference.

Background: The front left hub/drum assembly on my 57 front end is Left Hand Thread. Threads have been damaged when people were thinking they were loosening the bolts but in reality they were tightening them.

Knocked out all 5 studs and took them to the local auto parts place, but they could not find a replacement.

The stud is 1 1/2" Long, Shoulder is 5/8" Diam. and 1/2" long without Knurl (smooth), thread is 1/2" - 20

Thank, Jim








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Wheel Stud Part# Needed PV444 444-544

    posted by  Chris Mullet on  Tue Jan 8 16:04 CST 2013
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 09:08 CST 2014
    [RELATED]

    You may find something in this Dorman catalogue:

    http://www.dormanproducts.com/catalog/hardware2006/137-142_Sec10_Part2.pdf

    Note: Scroll down to the bottom of the document and you wil see the "Continued Next Page" button. It will open up the next pdf document. They put about six pages in each pdf document. It looks like the thread and knurl diameter (if it's knurled) get larger as you progress through the pages.







    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Wheel Stud Part# Needed PV444 444-544

      posted by  jk63pv544 on  Tue Jan 8 20:07 CST 2013
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Wed Oct 1 06:04 CST 2014
      [RELATED]

      Thanks for the link. It looks like its part # 610-171
      The kid at the auto parts store was looking at the Dorman catalog but could not find it. I'll check tomorrow if they have it or are able to get it.








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Wheel Stud Part# Needed PV444 444-544

        posted by  planetman on  Tue Jan 8 21:29 CST 2013
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Fri Oct 24 09:29 CST 2014
        [RELATED]

        Hello,

        If you can't find studs to modify, new correct sized right hand threaded studs are available and we usually have them in stock.




        --
        Eric
        Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
        Torrance, CA 90502







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.