Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What is this nozzle for? (w/ pics) 200 1984

posted by  Stickbuilder on  Sun Nov 2 21:15 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 03:31 CST 2014
[RELATED]

That's not a nozzle. It is the Block drain for the engine coolant. Fit a 13mm wrench on the draincock, and rotate it CCW to open, CW to close. For best results, fit a piece of rubber tubing over the drain, and place the end in a bucket, or empty coolant jug.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 What is this nozzle for? (w/ pics) [200][1984]
posted by  Lord Volvo subscriber  on Sun Nov 2 16:33 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.