I had an intermittant failure of all gauges on my dash. Took it out, cleaned and tightened the plug-in connections (I suspect the red wire was the culprit).
When I re-assembled things, i crossed the 2 wires for the speedo. I then changed it to the way it is supposed to be.

Now the speedo works, but the odometer has stopped. The up shift light (Manual Trannie) blinks now and agiain.

Any ideas what I did (what I fried) or how to fix?

Thanks.

I have been absent for quite awhile.....I bought a TR6 this spring. Not nearly as reliable...but a lot more fun to drive......