Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Identification of rebuilt rear calipers 700 1988

posted by  rwegner on  Sat Aug 25 11:10 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 29 09:42 CST 2011
[RELATED]

Hi,

I am replacing the rear calipers on my 88 765 Turbo, with rebuilt ones. When I compare the rebuilt ATE calipers with the original ones they look the same, but stamped on the end in a small circular raised area is the number 3 on the original ones. On the rebuilt ones, one caliper has the number 2 on both halves of the caliper, the other one has a 3 on one side and a 2 on the other.

Does this number have any significance? Should I be concerned about it or just go ahead and use the rebuilt calipers?

I have checked the 700 FAQ but can't seem to find any reference to this number.

Thanks,
Richard






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Identification of rebuilt rear calipers [700][1988]
posted by  rwegner  on Sat Aug 25 11:10 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.