Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front brake rotor disc wouldn't come off the hub V70-XC70 1998

posted by  someone claiming to be driver on  Tue Dec 23 09:23 CST 2003 [RELATED]

I followed Bay 13's web instruction (http://volvospeed.com/850fbreak2.htm) to change front brake disc. Removed caliper, caliper holder, 10mm stud pin. At the step of taking the rotor disc off the hub (between the 2nd and the 3rd picture on that page). However, the rotor disc wouldn't move at all. Used a lot of WD40 to try to lossen it, no difference.
That page says "use a hammer to break the rotor away from the hub". Doesn't move at all. Looks as if the big Hex nut at the center is holding the whole rotor disc in place, but if I try to remove this hex nut, the hub rotates too.

I'm stuck at this step. Anybody has any idea what to do next?

Appreciate it!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front brake rotor disc wouldn't come off the hub [V70-XC70][1998]
posted by  someone claiming to be driver  on Tue Dec 23 09:23 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.