Hi Mike
The ignition key needs to be in KP-I or KP-II to see +12VDC at the cigar lighters.
You confirmed +12VDC at fuse 30.
There's a Y-VO wire from fuse 30 pin 2 to connector 24/2A pin 12
This connector in the cabin in back of the light switch
Then there's a Y-VO) wire to connector 24/7A pin 15
This connector in the console by the shifter lever
Then: a Y-W wire to the rear lighter and
a Y-VO wire to the front lighter
Provide your email and I'll send the schematic and location pictorial
that shows the connector pinouts so you track the wire and locate
the fault. It may be a bad/ broken pin at one of the connectors.
Bill
|