Hi Ivan,
Probe the two ATC Fuses for +12 volts at each leg of the fuse with your VOM
with the fuses in place. Use intake manifold for ground.
11C/18 Fuse 18 (Ignition sw "S") check with ignition key in position I and II
11C/26 Fuse 26 (Ignition sw "15I") check with key in position II
The above tests check two ignition switch functions and relay 2/6
Do the two trays of fuses you checked have a number of relays next to them?
Did you check the lower level in the fuse box (11 fuses) ?
Fuse 5 powers the lamp module
The lamp module is in the upper fuse box marked "104 108"
This may have died.
Bill
|