The super glued bread clips worked and the compreesor is wired correctly with the temp sensor.

Another thing to add, don't know if glue on both side of clips is a good idea.
If glued on both sides, it prevents the 'clapping' effect of the clutch plate.

With the clips now glued to face of plate and face of existing white round shims, when the clutch engages, now the existing round white shim pulls through its mount hole. I got too much glue on and some got on the existing white shim mount holes....therefore not allowing the clutch to engage. I had to pry the plate closed to free the existing shim mount free (break the glue) of the outside plate.

So now the existing existing plastic white shims pull through their mount holes when AC is on.

Nice work...and thanks BB