Ok....getting closer to warmer days in Cali Valley. Needed AC today.

The compressor wiring is still bypassed as spooken in the thread. I did plug the wires back together as it should.....and the ac clutch did not engage.

I put the wires back as prior...and now it engages. So something with the little sensor on back of the AC....what does it sense?

Today, while needing AC, it turns on cold but within about 5 minutes, the cold temp goes down. I turn the cabin AC switch off for a while, and then turn back on, it gets cold again and then slowly goes back down in temp.

I pulled fault code from box B term 1

I get:
2 1 1 driver side damper position sensor open circuit or shorted to 12v
3 2 1 driver side damper motor active too long
4 1 4 driver side interior temp sensor inlet fan seized


So what do ya all think?