Volvo AWD S60 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2018 S60 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

timing belt problem, Can i bypass proceduere without locking the cams, Tool? S60

posted by  robrun on  Mon Feb 8 06:08 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 11 06:21 CST 2010
[RELATED]

Question I have been trouble shooting that the shop that replaced my timing belt did something incorrect. P0012 code cam up after timing belt installation.

Checked marks and appears to be ok as a friend and I basically re did the job.

So are now we are in line. Here is the issue that we found and what I think the shop and I have done.

We did not sue the special tool to lock the cam. I know the shop did not so now after redoing this I don’t know what position the cam was to be in originally.

So we marked the position be fore we stated so I basically have everything back the way it was. Now I getting two codes p0011 and p0012.

Looks like i need to get the special tool and realign the cam and lock and then redo the process.

Is there a special procedure for this????


I need all the help you got.

Friend is mankind special tool so we can redo.

There is not a lot of info on this particular problem

Should and do water pump as well.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New timing belt problem, Can i bypass proceduere without locking the cams, Tool? [S60]
posted by  robrun  on Mon Feb 8 06:08 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.