After charging the battery and cranking, I get 12V at the pump. I ordered a pump today.
The odd thing, at least I think it's odd, is that I still have a lot of pressure in the system. I figured the system would have little pressure on it. I removed the fuel line at the pump with the yellow tape on it and BAM! Gas everywhere. Once I did this and turned on the key, the pump girgled for a second or two. If the fuel pump is out, should I have fuel at the Schrader Valve, because I do? Maybe the fuel injector relay?
Any ideas on the best way to get off the FP Retaining Cap? I don't have access and can't buy locally the 999-5485 wrench. Also, how should I go about draining the fuel system considering finding the recommended connectors locally will be unlikely? I should be getting in the pump tomorrow.
|