Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2006 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Broken turn signal/cruise control shaft..Help! 850

posted by  someone claiming to be Dan on  Sun Feb 25 13:41 CST 2007 [RELATED]

I replaced the windshield wiper lever (right side) a few years ago. I assume it is similar to the left side lever (removal and installation process).

I used a torx 10? long shafted screwdriver which is inserted under the steering column shell cover to loosen and remove it. Once the shell was removed I had to disconnect two phone jack like wire connecters and remove two screws to remove the lever. Installation is the reverse of removal.

I had two functions with two wire connectors to unplug and re-plug. Since you have several functions on the left side lever, I suspect your will have more connectors. The more simple (right side) lever cost me $100 several years ago. I suspect the price will be considerably more due to your more complex part and inflation. Nevertheless, if you are minimally handy you can save the $100 an hour a dealer would charge you to do this.

Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Broken turn signal/cruise control shaft..Help! [850]
posted by  ralpha  on Sat Feb 24 13:49 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.