If it is indeed the top plastic that rattles, then MIJ's solution is correct. If that has already been done, you can adjust the U bolt on the bumper. Before adjusting it, stick a single layer of towel over the back so the gate closes on it. If that stops the rattle, then lift up the spare tire cover and you will see 2 #40 torx screws. loosen them - don't take them out! - and move the striker plate forward about 1/16th of an inch. If you move it more than 1/4 inch forward, you will breake the plastic in the latch mechanism and the latch needs to be replaced with a new one. Ask me how I know that!
Klaus
--
(V♂LV♂s 1995 854T, 1998 V70R)
|