Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/1999 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine torque bushing 850 1994

posted by  the kick inside on  Tue Sep 27 08:05 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 17 09:58 CST 2007
[RELATED]

1 lump of m10 threaded bolt (about 14 "), two nuts 2 washers to fit, a couple of blocks of wood and bit of steel bar and you can just pull the old bushing right out, and the new one right in...about 20 minutes - if you have to cut the bar, drill a hole in it and assemble - less if you dont! (if handy a two leg gear puller makes fianl adjustment a sinch, but not really required)

wouldnt monkey about with that awkward and risky sawing cutting!

of course the dealer tells you you need a 10 ton press (yeh right!)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine torque bushing [850][1994]
posted by  guillermo subscriber  on Sat Sep 24 00:03 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.