Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine torque bushing 850 1994

posted by  MadeInJapan on  Sat Sep 24 00:53 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 2 06:34 CST 2010
[RELATED]

Is this what you're talking about?
http://www.ipdusa.com/ProductsCat.aspx?CategoryID=256&NodeID=4720&RootID=629
If so, it's a very easy job. You'll have to use a hack saw to cut the old bushing out. be carful not to damage the bracket. Once the old is out, unloosing the long bolt and take it out. The new bushing is easy to replace. Put it in (two halves) and retighten the bolt and you're done. I would not recommend replacement with the Violvo OEM because it will deteriorate again and is more expensive than the newer poly-bushing. I believe that www.fcpgroton.com also sells these...maybe for a bit less.
--
1998 S70 T5 Emarald Green Metallic, 2004 V70 2.5T Ruby Red, Previous Owner of Black '94 850 Turbo Wagon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine torque bushing [850][1994]
posted by  guillermo subscriber  on Sat Sep 24 00:03 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.