The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Connector repair V70-XC70

Hi Tom,

>"ETB" ?
>Splash Guard missing ?
Find out about your connectors.
Go here and look for your style of connector, maybe EFI:
https://www.prancingmoose.com/blackvinyl.html

Connector shells generally have latches to separate male from female connectors.
The info to separate your connector may be at this site?
Check out the wealth of info there to repair connectors.

The crimp on pins generally have spring latches that hold them into the connector shells. You can fashion a release tool from a stainless steel bicycle spoke,
where you grind a thin tapered open slot screwdriver type tip.
You slide this tip under the latch from the harness end to free a pin from the shell, then you can remove that wire and pin. You can reset the latch to re-insert that pin by carefully bending it out again.

Get an 8 oz. tube of Penetrox-A for connector pins. ($16-19 @ Ebay)

I hope this helps, Bill









USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.