The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

cam cover off V70-XC70 2006

Good morning Klaus,

I watched the video and from what I could see most of this work would be done at a machine shop. I do have a local machinist who did work for me in the past. I will be contacting him once I have the head out of the engine.

I take it I should remove the cam followers [I am calling them that] and mark where they belong in the engine first.

Then I think I will have to move the head towards the front of the car in order to lift it away from the studs still projecting from its aft side. some of the studs stayed in place and others came with the nuts when i removed them.

I haven't really had a good look at the turbo but if it is connected only to the exhaust manifold I am hoping I can leave all of that in place when I pull the head.

Getting myself revved up for the next step!

Bob






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.