The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Gorillas and rust 850

I really hate rust, but combine that with a gorilla mechanic, I am ready for a hand grenade!

Simple job: replace rotors and pads in the front. No big deal. Until the caliper brackets do not budge. I have an electric impact gun and a 15mm 6 point socket. I even have a 5/8 pry bar. The impact gun is too large to fit in the wheel well. A 16oz hammer on the pry bar doesn't do anything. PB Blaster doesn't do much. I even tried a little heat (careful of the axle boot and bump stop on the control arm).

Am I forced to crawl to the local garage with my tail between my legs? They will probably use a small grip air pressure impact gun and have it off in 2 minutes.

Of course, my luck would have the rotor frozen to the hub!!!

The mechanic suggested replacing the control arms last year. I suppose I could have him install a pair of Lemforders, and let him do me a favor of loosening the 15mm bolts???

--
Keeping it running is better than buying new






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.