Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2015 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Haldex 3 servicing... V70-XC70 2007

uid 33936's pic
posted by  TheBrickTank on  Sun Oct 14 18:46 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

This coming weekend I'm going to remove the part of the Haldex 3 unit that attaches to the drive shaft so that I can remove the pump and check if it works yet as I'm about to put the AWD unit all back together before the weekend.

My question is this, when I put this piece back on, I'm assuming it needs to be torqued to a certain value, does anyone here know what that value is? Also, is there a preload torque valve that I should know about as I'm assuming there is a crush washer inside this unit.

I hope this makes sense, looking for insight.

Thanks in advance,

Matt
--
1989 - 245, 1990 - 245, 1991 - 245, and 1993 - 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Haldex 3 servicing... [V70-XC70][2007]
posted by  TheBrickTank  on Sun Oct 14 18:46 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.