Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2002 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stainless steel brake lines leaking V70-XC70 1999

posted by  roffe135 on  Thu Mar 12 03:39 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 9 18:44 CST 2013
[RELATED]

Hello again.
Recently replaced rotors, pads and tried to replace the new shiny stainless steel brake lines that came with the kit from FCP Groton. Started with the right front caliper. The brake line fit fine on the caliper itself, but when I tightened the fitting onto the solid brake line end, it leaked alot without ANY brake pressure applied...? This was supposed to be a bolt-on fit. The only difference I can think of is that the old lines (which I put back on)had a little more resistance when screwing them back on. Could it be a different flare on the brake line?
Anyone out there had a similar problem or any thoughts on this?
Rolf






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stainless steel brake lines leaking [V70-XC70][1999]
posted by  roffe135  on Thu Mar 12 03:39 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.