So my friend Mark and I tore into the car this morning fearing the worst.
To my surprise, upon removing the exhaust hub we immediately noted that the CAM seal was NOT seated correctly! Yea! The new seal was then installed.
Since I had already purchase a new hub, we compared the play of the hub that we just took off to the new one and came to the same conclusion that the play appeared to be the same.
We then carefully put the car back together.
It started right up and ran great and did not throw any codes!
Power washed the oil off of everything and called it a success.
Now onto my 1991 240 which is in need of some loving.
Matt
--
1989 - 245, 1990 - 245, 1991 - 245, and 1993 - 245
|