Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2008 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PCV banjo bolts question... V70-XC70 2007

uid 33936's pic
posted by  TheBrickTank on  Fri Apr 6 11:09 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

Yes, by process of elimination:

17mm head bolt goes into the intake manifold. Why? Because it was greasy and it part of the PCV system.

19mm head bolt goes into the head. Why? Because it is part of the water jacket that flows from the head to the thermostat.

I saw a drawing that highlighted both paths of the hoses and with the one being oily and greasy that made sense to me, so there you have it.

Matt
--
1989 - 245, 1990 - 245, 1991 - 245, and 1993 - 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PCV banjo bolts question... [V70-XC70][2007]
posted by  TheBrickTank  on Wed Apr 4 16:25 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.