Volvo V8 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2024

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Ford 5.0 wiring and cooling setups

posted by  TestPoint on  Wed May 7 03:32 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:49 CST 2014
[RELATED]

Here is the engine harness to body harness connections you will need to deal with:

Pin 1 - Oil Pressure (black) connection to the oil pressure sensor to operate the oil pressure light on the instrument panel.

Pin 2 - Temperature (yellow) connection to the temperature sensor to operate the temperature gauge on the instrument panel.

Pin 3 - Alternator (red) connection is to the Volvo ignition switch which supplies B+ through the instrument panel alternator light.

Pin 4 –

Pin 5 – Tachometer connection to the Volvo instrument panel tachometer.

Pin 6 –

Pin 7 - Ignition Start (blue/yellow) connection provides B+ from the Volvo ignition switch to the operating windings of the START relay added in the Converse conversion.

Pin 8 - Ignition Run (blue) connection provides B+ from the Volvo ignition switch.

Far more than you have a need to know can be found here:http://forums.turbobricks.com/showthread.php?t=250604





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ford 5.0 wiring and cooling setups
posted by  HotRodVolvo57  on Thu Mar 27 08:02 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.