Volvo V8 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2014

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

1982 Volvo 242 v8 For Sale.

Well... this car has countless hours of my time and lots of my money. The car screams. Please let me know if you have any questions.

Specs:

1982 Volvo 242 Coupe
5.0L Ford V8
Aluminum Heads with 220cc intake runners
Custom cam (.509 / .532 lift 222 / 232 duration)
Stainless steel roller rockers
9.8:1 Compression
Victor Intake
Everything port matched
Headman Headers
Edlebrock 750 Electric Choke Carb
ARP hardware
t5 5spd
IPD 25mm/25mm roll bars
IPD Rear adjustable Panhard Bar
IPD Rear Adjustble Torque arms
MSD 6AL Ignition
Custom dual 2.5" Exhaust

Car was from Georgia originally and is in good shape. Pics show 2 worst areas on car. Car needs a paintjob.

Located in Manchester NH - $3500 or trades?

The interior was a little taken apart when I took the pics, all back together now.

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/Volvo%201%20%28Large%29.jpg[/IMG]

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/Volvo%20Engine%202%20%28Large%29.jpg[/IMG]

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/Volvo%20Interior%20%28Large%29.jpg[/IMG]

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/Volvo%20Engine%203%20%28Large%29.jpg[/IMG]

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/Volvo%20Engine%201%20%28Large%29.jpg[/IMG]

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/Sunroof%20%28Large%29.jpg[/IMG]

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/New%20Suspension%20%28Large%29.jpg[/IMG]

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/Drivers%20Side%20%28Large%29.jpg[/IMG]

[IMG]http://www.umit.maine.edu/~matthew.wyatt/FOV18-001244AD/Drivers%20Door%20%28Large%29.jpg[/IMG]








  •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

    Very interested and have cash in hand (tax refund)..... Ive been looking for awhile for one of these. I am in Maryland and willing to work something out... Here is my cell.... 410-533-5522 Just leave a messagor you can email me at Mpowerguy1@yahoo.com

    Thanks,

    Justin



    Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





  •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

    How does the car drive? Is it nose heavy? How the shocks? Does the car float down the road? Also, I'm guessing you run hi-grade, so ruff est on MPG? Finally, how does she perform? The engine bay looks really clean, nice install.
    Thanks for your time,
    Blake



    Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





    •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

      It has aluminum heads, not really any heavier then the cast iron block with turbo that came out. Car handles very tightly, like a sports coupe should. I'm sure the car is capable of 20+ mpg, if you can keep your foot out of it.

      As far as it performs.... 400hp + volvo..... you do the math.



      Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.




<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.