Error: you cannot edit this post. It has been too long since it was posted.

Volvo V8 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bigger is not always better if it's misapplied ...

posted by  Epic2112 on  Wed Feb 11 14:35 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 12:15 CST 2014
[RELATED]

Hi Ken, thanks for the response.

Any chance you can tell by eyeballing it if this might be a 700/900 bar?

The hope is to eventually get a V8 in the car. I'm sure many more people have made that statement than have actually followed through, it is just a pipe dream for me at this point in time. That said, I do have a 25mm sway on the rear of the car. From what I have read, that's actually a little stiffer than some of people like when using the 28mm front bar, it seems like 28mm front & 23mm rear is a popular combo. I like my suspension stiff though.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New iPD V8 28mm sway bar for 240 fitment issues
posted by  Epic2112  on Sat Feb 7 18:57 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.