Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear light socket problems - update 200 1992

posted by  B.C. on  Tue Jul 12 18:36 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 28 22:28 CST 2012
[RELATED]

Ola Pancho -

Set things up so that the tail lights should be on, and the backups and brakes, too. (Jackhandle between brake pedal and moved-forward seat).

Then go back and manipulate the connector to the circuit board. See if any lights come on, go out, change to working right, or wrong. If you get the PS working OK, check the DS the same way.

The place on the circuit board where the connector bits touch can be oxidized and/or burnt. Only way to tell is to pull the connector off and look at the underside of that circuit board part - use a mirror and flashlight.

Good Luck, (Buen suerte?)

Bob

:>)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear light socket problems - high level brake light/tail light [200][1992]
posted by  Pancho Urbano  on Tue Jul 12 09:41 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.