Volvo RWD 900 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 11/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

air condictioning control relay location. 900 1992

If you have ECC, the '93 940 diagram shows a "dual relay" (my term for item 2/10) called a "Power unit ECC", which appears to control item 6/28, the "Cabin fan motor".

The pictorial shows 2/10 to be near the fan motor.

It has 2 harness plugs and appears to be fastened in place by 4 flange bolts, 2 on each side.

Fan ground side comes in on a blue/black wire at terminal 1A,
and connects to grounds via white/black wire from terminal 2A,
when a coil is grounded via blue/red wire from terminal 3 to Control module pin 22.
--
Bruce Young
'93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New air condictioning control relay location. [900][1992]
posted by  yaoh  on Wed Apr 27 09:36 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.