Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 10/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

LH 2.4 No response from ECU when using OBD 200

posted by  GustafKalle on  Tue Apr 12 10:56 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 2 13:57 CST 2007
[RELATED]

Hi,

Not necessarily any ECU failure. Had same no-response situation in 940 with LH2.4. Engine had suddenly started to run very poorly. Turned out to be one of the injector connects that was half-loose. Either a response here on the board, or in the FAQs, mentioned that you can have a no-response due to oxidized leads, for example at the main board connector leads. I never dug into that, since my problem was easily fixed. Checked again 1.5 years later, still no OBD signals, car ran like a beauty.

IMHO I would check the main board connector for oxidation, maybe my problem was just one oxidised lead, maybe you have also a, for function, critical lead oxidised. Letīs hope for a simple explanation first, before fearing the worst.

GustafKalle






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New LH 2.4 No response from ECU when using OBD [200]
posted by  someone claiming to be tjts1  on Tue Apr 12 06:26 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.