Volvo RWD 900 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 3/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Question about Control (Radius) Rod Bushing Replacement 900 1993

posted by  mcduck on  Fri Apr 8 04:28 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 9 11:47 CST 2012
[RELATED]

If you're going to do suspension work, you'll need a set of 1/2 inch sockets 15mm-22mm. Even if you can get the fasteners off with a 3/8", you can't get them tight enough when you reassemble.
Also, Volvo isn't very consistent about the head size of bolts with the same size thread; for instance, I've found bolts in the end of the strut rod with 15, 16, and 17mm heads.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Question about Control (Radius) Rod Bushing Replacement [900][1993]
posted by  ian f. subscriber  on Fri Apr 8 02:24 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.