Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 1/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

crappy idle 200 1986

posted by  someone claiming to be frankford on  Fri Apr 1 14:15 CST 2005 [RELATED]

The fuel injector seals are actually pretty easy, pull the fuel pump relay and start the car. Open the line (have a bucket to catch the fuel. The injector rail will lift off after taking off both bolts. After toging a little the injefctors should pop out of the the intake maniford. After you replace the seals on the injectors wipe out the ports on the intake maniford. There is dirt down inside the manifold. Make sure you get this out as it will make it easier for the new seals to do thier job.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New crappy idle [200][1986]
posted by  illbird68  on Fri Apr 1 07:50 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.