Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2024

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

alternator

posted by  c_j_mooney on  Tue Mar 22 04:51 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 14 17:39 CST 2011
[RELATED]

Possible, yes. You'll want an impact wrench to remove the pulley nut without mangling the pulley, a bearing puller, and likely a propane torch & plenty of P'Blaster or Kroil. Worst of it is the screws holding the case together. An impact screwdriver is your best friend here. Also the screws holding the brush pack will likely be seized. If they won't turn, drill the heads off, lift the brush pack out, and then use vise grips & heat once you've got the case apart.
-Chris






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New alternator
posted by  alps  on Tue Mar 22 04:23 CST 2005 >
  • New alternator
    posted by  c_j_mooney  on Tue Mar 22 04:51 CST 2005 >
    • New alternator
      posted by  alps  on Tue Mar 22 05:02 CST 2005 >
      • New alternator
        posted by  c_j_mooney  on Tue Mar 22 07:01 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.