Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2020 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ahem, programming two remotes... S90-V90 1998

posted by  Shatz on  Tue Feb 22 13:29 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 6 11:38 CST 2011
[RELATED]

GUARD ALARM II
1) Ensure all doors, hood, and trunk are closed. Turn
ignition on and off at least 5 times in 10 seconds. Indicator LED
should start to flash. Leave ignition on. Once indicator LED starts
flashing, first remote control must be programmed within 15 seconds.
2) Press one button on one remote control. Programming is
acknowledged by indicator LED lighting for about 2 seconds. Indicator
LED will then start flashing for 10 seconds. Program other remote
control within 10 seconds while indicator LED is flashing. Turn
ignition off. Test remote controls.
--
John Shatzer, '97 V90 @ 115K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Programming a Remote [S90-V90][1998]
posted by  someone claiming to be sevenvolvos  on Mon Feb 21 04:00 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.