Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Misfire Code 900

posted by  Bonafide on  Thu Dec 23 09:43 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I changed the spark plugs. Installed Bosch plugs, gapped at .030", and torqued to 18 ft-lbs. Now I am getting the check engine light and the codes are saying misfire on cylinder 1 and misfire on all cylinders.

I changed them out one at a time and did not disconnect the coil wires.

Do I have to use anti-seize on the spark plug threads?

Any thoughts as to why I am getting these codes after I changed the plugs? The plugs I took out were the Bosch with the 3 electrodes on them that do not have to be gapped.

Thanks,
Jimmy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine Misfire Code [900]
posted by  Bonafide  on Thu Dec 23 09:43 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.