Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2009 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Did you use the MB airflow sensor, too? 140-160 1974

posted by  someone claiming to be anthony on  Thu Oct 14 06:13 CST 2004 [RELATED]

Sorry, I forgot to mention, I made my own manifold. I went through this whole setup because I got the whole K-jet for free and I had no access to an FI manifold. Another reason to this setup is because I wanted to turbo this engine and I knew the 280E setup would feed enough fuel for my needs. (But then I had detonation problems with the turbo, and blew out a ring. The retard machanism jammed in distributor) So I had to go through a rebuild.
I have now ditched this setup and I am using a L-jet system from a 3t-gte toyota engine, and ca18det injectors. Part of the reason is because this ECU senses knock which then increases fuel. (Very crude system... no electronic timing control) I would recommend this ecu to anyone, very easy to play with...
Here are the pics from the ole K-jet...





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Got my k-jet updated. [140-160][1974]
posted by  uniberp  on Wed Oct 13 03:42 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.