Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2011 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

drum pulling tool? 1800 1966

posted by  someone claiming to be SteveW on  Mon Oct 11 08:59 CST 2004 [RELATED]

You don't need a puller to pull the half shaft. First, you have to remove the brake drum, and also the brake backing plate (4 bolts). Then, just grab a hammer in one hand, the end of the half shaft with the other. Pull on the end of the half-shaft as you gently tap on the end of the axle housing just inboard of the flange where the brake backing plate was bolted. The half shaft should come out with the axle bearing after a few gentle taps with the hammer.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New drum pulling tool? [1800][1966]
posted by  66Saint  on Sat Oct 9 14:25 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.