Receieved and installed complete "sport" 2" exhaust system yesterday, and am quite pleased. This is dual downpipe to chromed exhaust tip on rear muffler, with all required hanging hardware.

My only criticisms are:

The passenger side emergency brake cable passes over and touches the system.

Although the directions are in either Swedish or Danish (with adequate diagram) I'd like to understand what they've taken the time to impart.

The other problem has to do with the OD speedo cable crossing the front muffler. It passes over the muffler right over the front clamp on the muffler. I've been looking for a good inexpensive right angle drive, but haven't found one yet. This would help.

Sounds good at idle and around town - haven't gotten it out on the road yet. I was worrried about the noise this thing would generate. Well fabricated and good fit. Instead of using the existing rubber doughnuts/hanger for the rear muffler, this system hangs it's muffler from one of the bumper bracket bolts. They supply the rubber hanging strap, and a larger washer for the bracket bolt (I would advise getting a longer bolt though)

$162 + $25 shipping from Michigan

This is behind a B20/ E head/ D cam/ SUs w/KD needles. Found and rebuilt this motor right after 9/11/01.