Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Follow up.

posted by  torsten on  Wed Sep 8 10:56 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]


Bought a large drill today and drilled out the bolt. It went a bit to the side 0.5-1.0 milimeters on the top side but no worries, the bolt cant move on the downside were the ball joint is.

Got a generic 12mm bolt and a lock nut with some loctite. I doubt it will ever come loose again without power tools. That thing is tight! :)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Welding the ball joint.
posted by  torsten  on Mon Sep 6 06:23 CST 2004 >
  • New Follow up.
    posted by  torsten  on Wed Sep 8 10:56 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.