Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2009 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Walbro Fuel Pump 140-160



> Did you use any special fittings for the inlet and outlet,
> if so which ones did you pick?

Lets see, its been a while. I think I used the 12mm barbed to go to the *nominally* 0.5" tube coming out of the fuel tank (that's a tough one to find in fuel safe material) and the 9mm barb for the outlet. Once all the soft fuel tubes got replaced I promptly forgot all the dimensions...

> And what is this "tray" you're
> speaking of. The pump on my 140 just has this metal strap around
> it that bolts into two rubber shock absorbers.

On my '71 the fuel pump rests on a tray just to the right of the fuel tank and behind the rear wheel. It has both the pump and the fuel filter in there.

I've heard that different years came with different fuel tank outlet diameters (0.5" being the biggest). Maybe there were different ways of mounting the pump too?

I hated that job. I think every tool I owned ended up smelling like gasoline. *shudder*

Joel






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Walbro Fuel Pump [140-160]
posted by  Sil subscriber  on Wed Aug 11 03:12 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.