Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

electrical/stalling problem 200 1987

posted by  ngm on  Fri Jul 16 11:06 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Mar 28 09:12 CST 2014
[RELATED]


Well I've checked all the plugs and they are in very good shape as is all the wiring I can see. However most of my wiring is in black sheathing, and from what I've read it can be quite bad under that... Should I just cut off the sheathing? Or does some one have a good wiring diagram of the harness so I can pull off some plugs and do some continuity checks. Sounds like replacing this is a fair bit of work and the part isn't cheap so I want to be sure, before I start.

Thanks,
-n






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New electrical/stalling problem [200][1987]
posted by  ngm  on Fri Jul 9 13:15 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.